Attach the cables required between the video encoder and the camera, then configure the video encoders settings.
Hardware connections:
Hardware connections:
File name: Update time: Download: D30 Driver: 2020-09-12: D10 Driver 2020: 2020-07-03: D20 Driver 2020: 2020-07-02: D20 Firmware USB anti-interference: 2020-07-02. Sony Evi-d100 Driver For Mac Free; Sony Evi D100 Camera; PTZ Controller supports Sony VISCA protocol. It works well with Sony EVI D30, EVI D70 and EVI D100 cameras respectively. Sony VISCA protocol normally can support a daisy chain of up to sever attached cameras. So, it is also available to control up to several Sony EVI-D series cameras with.
Find firmware updates, drivers and software downloads for Cameras & Camcorders.
- Connect the video from the camera to the video encoder. On the back of the EVI-D30/31 there is an area labeled “OUT”. Underneath “OUT”, one of the RCA jacks is labeled “VIDEO”. Connect a RCA cable from this to one of the video encoder’s open video in ports. You may need to use an RCA to BNC converter on the side of the cable that is being connected to the 2400/2400+.
- Connect the VISCA cable from the COM1 serial port on the 2400/2400+ to the VISCA IN port on the back of the EVI-D30/31.
- Next, configure the camera ID on the EVI-D30/31. On the back of the EVI-D30/31, above “OUT” there is an area labeled ‘CAMERA NO.’ witch you can set to 1.
Video Encoder Configuration:
Note this section of configuration is firmware version specific.
AXIS 2400/2401 firmware version 2.xx and AXIS 2400+/2401+ firmware version 3.xx:
- Bring the web interface of the AXIS 2400/2400+ up in a browser window.
- Click the admin button to enter the administration pages on the video encoder.
- Click the icon labeled ‘COM1’ and change the following settings:
- Set ‘Purpose’ to ‘Pan Tilt’
- Set ‘Interface Mode’ to ‘RS232’
- Set ‘Baud Rate (bps):’ to 9600
- Set ‘Data Bits:’ to 8
- Set ‘Stop Bits:’ to 1
- Set ‘Parity Bit’ to None
- Click the ‘Save’ button
- Set ‘Interface Mode’ to ‘RS232’
- Set ‘Baud Rate (bps):’ to 9600
- Set ‘Data Bits:’ to 8
- Set ‘Stop Bits:’ to 1
- Set ‘Parity Bit’ to None
- Click the ‘Save’ button
- Next click the icon labeled ‘Pan Tilt’ located below the icon for ‘COM1’
- Set ‘Drivers for Pan Tilt’ to ‘Sony EVI-G20/G21/D30/D31’
- Click ‘Save’
- Click ‘Save’
- Next click the icon for the video input the EVI-D30/31 is attached to
- Set ‘Pan Tilt Serial Port’ to ‘Sony - EVI-G20/G21/D30/D31’
- Click the ‘Driver Specific Settings’ button
- A new browser window will launch to display the parameters.
- Change ‘Camera X has ID’ to ‘no 1’.
- Click the ‘Driver Specific Settings’ button
- A new browser window will launch to display the parameters.
- Change ‘Camera X has ID’ to ‘no 1’.
- Set the drop down box to the right of ‘no 1’ to ‘D30/D31’
- Click ‘Apply’
- Click ‘Close’
- Click ‘Apply’
- Click ‘Close’
- That will complete the PTZ setup.
AXIS 2400/2401 firmware version 1.xx:
- Bring the web interface of the 2400 up in a browser window.
- Click the admin button to enter the administration pages on the 2400.
- Click the icon labeled ‘COM1’ and change the following settings:
- Set ‘Purpose’ to ‘Pan Tilt’
- Set ‘Interface Mode’ to ‘RS232’
- Set ‘Baud Rate (bps):’ to 9600
- Set ‘Data Bits:’ to 8
- Set ‘Stop Bits:’ to 1
- Set ‘Parity Bit’ to None
- Click the ‘Save’ button
- Set ‘Interface Mode’ to ‘RS232’
- Set ‘Baud Rate (bps):’ to 9600
- Set ‘Data Bits:’ to 8
- Set ‘Stop Bits:’ to 1
- Set ‘Parity Bit’ to None
- Click the ‘Save’ button
- Next click the icon labeled ‘Pan Tilt’ located below the icon for ‘COM1’
- Set ‘Drivers for Pan Tilt’ to ‘Sony D30/D31’
- Click ‘Save’
- A new window will appear titled ‘Specific parameter for Sony D30/D31’.
- Change the ‘Camera X is connected to ID’ to ‘ID no 1’ than click 'Apply' and 'Close'.
- Click ‘Save’
- A new window will appear titled ‘Specific parameter for Sony D30/D31’.
- Change the ‘Camera X is connected to ID’ to ‘ID no 1’ than click 'Apply' and 'Close'.
- Next click the icon for the video input the EVI-D30/31 is attached to
- Set ‘Pan Tilt Serial Port’ to ‘COM1 – Sony D30/D31’
- Click Save
- Click Save
- That will complete the PTZ setup.
Troubleshooting:
If the EVI-D30/D31 will not PTZ then try the following:
- Check the VISCA cable connection to make sure it is secure
- Recheck all the parameter settings.
- Restart the video encoder and try to PTZ again.
- Recheck all the parameter settings.
- Restart the video encoder and try to PTZ again.
Vote, how useful was this article to you?
Special financing available Select PayPal Credit at checkout to have the option to pay over time. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. Table of Contents Preparations Connections This item will ship to United States , but the seller has not specified shipping options. Seller assumes all responsibility for this listing.
Uploader: | Malalar |
Date Added: | 6 April 2008 |
File Size: | 30.61 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 73177 |
Price: | Free* [*Free Regsitration Required] |
Seller assumes all responsibility for this listing.
Sony EVI-D30 Camera | eBay
sony evi d30 Minimum monthly payments are required. The clock starts operating as you press the TIME sony evi d30 to set the minute. This item will ship to United Statesbut the seller has not specified shipping options. Select a valid country. For additional information, see the Global Shipping Program terms and conditions – opens in a new window or tab. Refer to eBay Return policy for more details.
Please enter 5 or 9 numbers for the ZIP Code. Have one to sell? Other offers may also be available.
This item will be shipped through the Global Shipping Program and includes international tracking. Maintenance Clean dirt and soil with a soft evu or tissue paper. Do not use any other AC power adaptor. Sell now – Have one to sell? This amount is subject to change until you make payment. Sony evi d30 the Sny function still does not work after the procedures mentioned in pages 14 and 15 are repeated, select an ENTRY mode that is matched to conditions under which the camera is used.
People who viewed this item also viewed. Having the Camera Memorize the Setting —Presetting sony evi d30 Up sony evi d30 six combinations of the setting position, zooming, focusing and back lighting can be preset.
Sony EVI-D30 Operating Instructions Manual
Learn More – opens in a new window or tab International shipping and import charges paid to Pitney Bowes Inc. Learn More – opens in a new window or sony evi d30. If A Subject Cannot Be Sony evi d30 Or Captured If a subject cannot be recognized or captured Depending on the characteristic or condition of a subject, the camera might hardly recognize the subject.
Maintenance, Troubleshooting Maintenance Clean dirt and soil with a evj cloth or tissue paper. sojy
Page 18 – Detecting the Change Taking Place in the See terms – opens in a new window or tab. Ratings and Sony evi d30 Write a review. There are 1 items available.
Sony EVI-D30 (North America) – Crestron Application Market
Product manual technical manual for evi-hv and evi-hs 54 pages. Add to watch sony evi d30. Operating range of the remote commander Use the remote commander within the range described below, facing it toward the receptor for the remote commander.
Evi D30 Drivers For Macbook Pro
Don’t have an account? Got it, continue to print. Resume making your offerif the page does not update immediately. Learn More – opens in sonu new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Total Sony evi d30 Products Sony evi d30. Seller information totalvideoproducts Repeat the steps 2 and 3 to set the other time elements in the order of month, date, hour, and minute.